SnapAround® Cable Markers

  • Outdoor durable, UV, solvent and water resistant
  • Custom sizes, colors and messaging
  • Mount around metal pipes, wires, cables
  • RFID available


Related products


Our customized SnapAround® Cable Markers are made of coiled PVC plastic and are easy to install. Just unroll and “snap” around existing cable, optical fiber, pipe, duct or tubing. The cable marker holds its tight coil around the cable for the life of the marker. Available in standard or custom graphics and messages. Add RFID to combine the benefits of visual identification with the efficiency of RFID technology.


Cable Diameter Marker Size
0.375 to 1.0″ 4″x4″, 4″x7″
1.0″ to 2.5″ 7″ x 8″

Additional information

Weight N/A
Dimensions N/A
Model Number

WFS-ES-SNAPAROUND SnapAround Cable Markers


Asset Marking, Outdoor Use, Safety & Compliance, Utility Labeling


Rigid PVC Plastic


4"x4" (0.5"-1.0" cables), 4"x7" (0.5"-1.0" cables), 7"x8" (1.0"-2.5" cables)

Expected Outdoor Life

7 – 10 Years

Temperature Service Range

-20°F to 185°F


Black, Orange, Blue, Green, Red, White, Yellow

Water Resistance


Solvents Resistance

Very Good

UV Resistance

Very Good

Abrasion Resistance

Very Good

Shelf Life

Completely Stable, Stored at 70F and 50% Relative Humidity

RFID Performance

RFID Protocol UHF Class 1 Gen 2

*Other single record and dual record chips available.

Tested Polarization:

Tag performance was experimentally measured in an anechoic chamber with a known set of experimental variables. The antenna used for measurements was linearly polzarized and of monostatic configuration. The direction of tested polarization is as follows.

RFID SnapAround Polarization Image

Optimal Read Range* on Different Material Surfaces:

RFID SnapAround Read Range Graph

*Tag performance was measured free of material influence. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.