Learn about our updated compliance with GDPR - please view our Privacy Policy and GDPR FAQ

Small Metal Mount RFID Tag with Screw Holes

High Temperature, Chemical & Solvent Resistant, RFID Product, Versatile Attachment, Harsh Environment, Short Range RFID

  • Currently 0/5 Stars.
Small Metal Mount RFID Tag with Screw Holes small

Small Metal Mount RFID Tag with Screw Holes

 

  • Water and chemical resistant
  • Available without adhesive
  • Capable of below the surface embedding
  • Available with other inlays

 

 

The WF-SM-75HT employs rugged MSOP chip on board design for exceptional temperature and harsh environment performance. Excellent read/write capabilities on any metal surface or embedded below the surface. Comes with convenient screw attachment holes on each side in addition to optional adhesive backing.

 

Versatile attachment options and resistance to high-temperatures, water, chemicals and abrasions make this a tag with many uses.


Download Product PDF

Bookmark and Share

Applications

Metal Mount, Warehouse, Container Tagging, Heavy Machinery, Harsh Environments, Outdoor Use, High Temperature, Power Tools Tracking, Construction, Manufacturing

Material
Description

High Temperature Resistant Plastic

 

Size (L x W x H) 1.38" x 0.79" x 0.20"
Expected Outdoor Life Very Good
Water Resistance Excellent
Chemical Resistance Excellent
Impact Resistant Fair
Abrasion Resistance Excellent

 

 

Test* Temperatures and Duration Results
Maximum Temperature Long-term at 10 hr: 320°F (160°C) No effect on tag. Tag remained the same in appearance and RFID performance/function. There was no sign of peeling, tearing or destruction. The tag read normal after the tests. *Test is not limiting.
Standard at 5 min: 360°F (182°C)
Short-term at 90 sec: 400°F (204°C)
Minimum Temperature -40°F (-40°C)
Temperature Cycling The tag was cycled to 400°F at equilibrium for five times. Between each cycle, it was air cooled to room temperature and read with an RFID reader.

RFID Performance

 

RFID Protocol UHF EPC Class 1 Generation 2
Tag Type Passive Read/Write
Frequency Range 860 ~ 960 MHz (Global)
IC Impinj Monza 3

 

Tested Polarization:

 

Tag performance was experimentally measured in an anechoic chamber with a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is as follows.

 

 

 

 

 

 

 

 

 

 

 

 

Optimal Read Range* on Different Material Surfaces:

*Tag performance was measured free of material influence, on a dry wood, window glass, thermoplastic, and steel slabs. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.

Adhesive

Permanent Acrylic

 

Thickness 2.0 mil
Min App Temp 50º F
Adhesion to Steel at 72 hr. dwell Excellent
Adhesion to LSE plastics: Fair
Adhesion to HSE plastics Very Good

 


Available without adhesive

Shelf Life

Stored at 70F / 50% Relative Humidity

 

Stable at room temperature

 

 

Design

Small Metal Mount RFID Tag with Screw Holes Design

Find it Now!

WeatherTUFF Outdoor Labels
Buy Now on Shop.Fricknet
Browse by categories: