Silicone Coated Wire RFID Tag

Versatile Attachment, Harsh Environment, High Temperature, Chemical & Solvent Resistant, Waterproof

  • Currently 5/5 Stars.
Silicone Coated Wire RFID Tag picture
Silicone Coated Wire RFID Tag small

Silicone Coated RFID Wire Tag

A flexible wire-based RFID tag, the WF-SM-25S features a rugged MSOP (packaged chip) on FR4 board electronics. It has excellent read/write performance on any surface. The silicone coating makes this RFID tag resistant to extremes of heat and cold.  It also provides resistance to solvents.

 

  • Flexible
  • Versatile attachment
  • Heat and cold resistant
  • Water and chemical resistant

Download Product PDF

Bookmark and Share

Applications

High Temperature, Heavy Machinery, Harsh Environments, Container Tagging, Construction, High Value Asset Labeling, Manufacturing, Metal Mount, Oil, Gas, Water Pipelines, Outdoor Use

Material
Description

Overall Thickness: 6mm
Expected Outdoor Life: Excellent
Water Resistance: Excellent
Chemical Resistance: Excellent

 

Test* Temperatures and Duration
Results
Maximum Temperature Long-term at 10 hr: 320°F (160°C) No effect on tag. Tag remained the same in appearance and RFID performance/function. There was no sign of peeling, tearing or destruction. The tag read normal after the tests. *Test is not limiting.  

Standard at 5 min: 360°F (182°C)

Short-term at 90 sec: 400°F (204°C)

Minimum Temperature

 

-40°F (-40°C)
Temperature Cycling The tag was cycled to 400°F at equilibrium for five times. Between each cycle, it was air cooled to room temperature and read with an RFID reader.

RFID Performance

 

RFID Protocol: UHF Class 1 Generation 2
Frequencies: 860 - 960 MHz
Chip Manufacturer: Impinj

 

Tested Polarization:

Tag performance was experimentally measured in an anechoic chamber and a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is as follows.

 

Optimal Read Range* on Different Material Surfaces:

 

*Tag performance was measured free of material influence, on a dry wood, window glass, thermoplastic, and steel slabs. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.

 

 

 

Adhesive

Permanent Acrylic

Type: Permanent Acrylic
Thickness: 1 mil +/- 10%
Adhesion to Steel at 72 Hour Dwell: Excellent
Adhesion to LSE Plastics: Fair
Adhesion to HSE Plastics: Very Good

Also available without adhesive

Shelf Life

Stored at 70°F and 50% Relative Humidity

Stable at room temperature

Design

Silicone Coated Wire RFID Tag Design

Customer Reviews

5 Stars:
( 3 )
4 Stars:
( 0 )
3 Stars:
( 0 )
2 Stars:
( 0 )
1 Star:
( 0 )
Average Customer Review
  • Currently value-of(rate)/5 Stars.
  • Currently 5/5 Stars.

Solvent Resistant Silicone Coated RFID Tag, February 24 2011

By: Robert

Frick's silicone coated RFID wire tag was the solution to our problem of RFID tags not being solvent resistant. This RFID tag performs perfectly in our plant despite repeated exposure to solvents and wide temperature swings.
  • Currently 5/5 Stars.

RFID Tags for Our High Temp Processes, February 24 2011

By: Bill

The coated RFID wire tag we get from William Frick operates perfectly in our high temperature manufacturing line. We needed a flexible wire RFID tag that would withstand harsh temperatures, and these silicone coated tags are exactly what we needed.


Show All Customer Reviews

Create your own review

Similar Products


WF-SM-IN02RAW Uncoated Wire Tag
Uncoated RFID Wire Tag
  • Currently 5/5 Stars.


WF-SM-PC102 High Impact Resistant Tag on Weldable Metal
Impact Resistant RFID Tag on Weldable Metal
  • Currently 5/5 Stars.


WFS-SM-0001 RFID Strap Label
RFID Strap Label
  • Currently 5/5 Stars.


Find it Now!

Go

Find Quote by Number!

Click to chat online

Call us toll-free

(866) 669-7590

Outside the U.S.

(847) 918-3700

Sign up for special offers!
I Agree to receive e-Mail from William Frick & Co.

Privacy
Browse by categories: