RFID Oxygen Generator Tag
Barcode & Variable Data, RFID Product, Aggressive Adhesion, Custom Printed & Programmed, Durable Product ID, Long Range RFID, LSE Adhesive, RFID Labels
RFID Oxygen
Generator Tag
- Reduce inspection time from hours to minutes
- Electronically upload maintenance data and expiration dates
- AS5678A Certified
A patented RFID tag solution that offers best in class read range on aircraft oxygen generators.
For airlines, using an RFID oxygen generator tag can improve daily expiration date inspections by reducing time & labor while increasing accuracy. Data that hasn’t been previously recorded can be accessible where needed.
RFID Oxygen Generator Tag
Size | 6.125” x 1.00” |
Overall Thickness | .015" |
Temperature Range | -40°F to 185°F (-40°C to 85°C) |
Minimum Application Temperature | 50ºF |
Industry Certification | SAE AS5678A, DO-160, ATA Spec2000 |
Operating Frequency | 840-960MHz |
Supported Protocol | ISO 180000-6C, UHF EPC Gen 2 |
IC | *Alien Higgs 3 |
*Other single record and dual record chips available
Tag performance was experimentally measured in an anechoic chamber and a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is as follows.
Optimal Read Range* on Different Material Surfaces:
*Tag performance was measured free of material influence. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.
Permanent acrylic
Caliper | .002" (0.05mm) |
90º Peel Test | 82N/m |
Temperature Range | -40°F to 185°F (-40°C to 85°C) |