Learn about our updated compliance with GDPR - please view our Privacy Policy and GDPR FAQ

RFID Aircraft Security Seal Tag

Chemical & Solvent Resistant, RFID Product, Destructible / Tamper Evident, Security Features, Tamper-Evident

  • Currently 0/5 Stars.
RFID Aircraft Security Seal Tag small RFID Aircraft Security Seal Tag small

RFID Aircraft Security Seal Tag


  • 10 Newton (2.25 lbs/sq. in.) Pull Force
  • Up to a 6 ft. read range
  • Perfect for asset tracking, galley carts and medical kits
  • ATA Spec 2000 Chapter 9-5 (Version 2013), SAE AS5678A / DO-160, DIN 40050-9 and UL94V0 certified


HID Gold Partner


Unlike tamper evident labels that need to be visually inspected in order to check the tamper status, the RFID Aircraft Security Seal Tag allows tamper detection via RFID. The digital tamper detection allows for an entire aircraft to be scanned and verified in minutes, resulting in a huge time savings over manual inspections.


The chip indicates a secured status when the tamper loop is closed and a tampered state when the loop is opened/broken. The 10 Newton pull strength prevents the loop from opening during normal use but allows it to be broken by hand when needed. If the wire is open/broken, the chip's status will change, indicating tamper evidence.


The RFID Aircraft Security Seal Tag makes use of a technology that changes a bit when the seal is broken. Bit 512 of the EPC block is set to 1 when the seal is intact, but once it breaks the bit changes to a zero. This corresponds to word 32 of the EPC changing from 8040 to 0040. UHF readers may then use software to identify the EPCs of broken seals out of a large group with a simple wave, saving time and effort.

Download Product PDF

Bookmark and Share


Identification Labeling, Asset Marking & Tracking, Tamper Evident Seals, Security, Tamper-indicating Labels and Seals


Dimensions 1.53" x 0.55" (3.07" cable)
Overall Thickness 0.14"
Color White
Service Temperature -40°F to 180°F
Water Resistance Good
Solvents Resistance Excellent


Test* Temperatures and Duration Results
Maximum Temperature Long-term at 10 hr: 180°F (82°C) No effect on tag. Tag remained the same in appearance and RFID performance/function. There was no sign of peeling, tearing or destruction. The tag read normal after the tests. *Test is not limiting.
Standard at 5 mins: 204°F (95°C)
Short-term at 90 sec: 216°F (102°C)
Minimum Temperature -40°F (-40°C)
Temperature Cycling The tag was cycled to 216°F at equilibrium for five times. Between each cycle, it was air cooled to room temperature and read with an RFID reader.


RFID Performance


RFID Protocol EPC Class 1 Gen 2; ISO18000-6C
Tag Type Passive Read/Write
Frequency Range 860-960 MHz (Global)
User Memory 112 bits
EPC Memory 256 bits


Tested Polarization:

Tag performance was experimentally measured in an anechoic chamber and a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is as follows.


RFID Aircraft Security Seal Tag


Optimal Read Range* on Different Material Surfaces:

RFID Aircraft Security Seal Tag performance graph


*Tag performance was measured free of material influence, on a dry wood slab, standard steel slab, standard window glass, and standard thermoplastic.


Please note: Actual read ranges may differ depending on conditions such as type of reader, reader power setting, environment, tag placements, hardware, etc.



RFID Aircraft Security Seal Tag Design

Similar Products

Find it Now!

WeatherTUFF Outdoor Labels
Buy Now on Shop.Fricknet
Browse by categories: