Learn about our updated compliance with GDPR - please view our Privacy Policy and GDPR FAQ

Metal Mount Tool Tracking RFID Tag

RFID Product

  • Currently 0/5 Stars.
Metal Mount Tool Tracking RFID Tag small Metal Mount Tool Tracking RFID Tag small

Metal Mount Tool Tracking RFID Tag

 

  • Small, compact design for discreet installation
  • Dust, water, chemical and acid resistant
  • Withstands extreme temperatures and physical stress
  • Great for asset RFID tool tracking
  • Embed in metal or attach with adhesive

 

HID Gold Partner

 

The Metal Mount Tool Tracking RFID tag is a family of very small tags that are ideally applied on metal surfaces, such as tools. The lightweight and compact sizes allow them to fit in or on any small assets or tight spaces. Even with their small, compact sizes, the tags provide consistent asset identification.

 

Each RFID tag is available in 4 sizes (see below) and can be ordered with or without adhesive. Application recommendations are permanent acrylic adhesive for smooth surfaces and epoxy mounting for rough surfaces and high vibration locations.

 


Download Product PDF

Bookmark and Share

Applications

Identification Labeling, Metal Mount, Asset Marking & Tracking, Medical Equipment, Power Tools Tracking, Tools Tracking

Material
Description

Painted Ceramic

Dimensions 0.4 x 0.1 x 0.1 in
0.2 x 0.2 x 0.1 in
0.4 x 0.2 x 0.1 in
0.9 x 0.4 x 0.1 in
Color Black
Service Temperature -40°F - 185°F
Water Resistance IP67
Solvents Resistance Good
Oil Resistance Excellent
UV Resistance Good

 

Test* Temperatures and Duration
Results
Maximum Temperature Long-term at 10 hr: 185°F (85°C) No effect on tag. Tag remained the same in appearance and RFID performance/function. There was no sign of peeling, tearing or destruction. The tag read normal after the tests. *Test is not limiting.  
Standard at 5 min: 209°F (98°C)
Short-term at 90 sec: 240°F (106°C)
Minimum Temperature -40°F (-40°C)
Temperature Cycling The tag was cycled to 222°F at equilibrium for five times. Between each cycle, it was air cooled to room temperature and read with an RFID reader.

RFID Performance

RFID Protocol EPC Class 1 Gen 2; ISO18000-6C
Tag Type Passive Read/Write
Frequency Range 869 MHz (EU)
915 MHz (US)
User Memory 512 bits
EPC Memory 96-480 bits
IC Alien® Higgs® 3

Tested Polarization:

Tag performance was experimentally measured in an anechoic chamber and a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is as follows:

 

Metal Mount Tool Tracking RFID Polarization

 

 

Metal Mount Tool Tracking RFID Performance Graph

 

*Tag performance was measured on a standard steel slab. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.

 

 

Adhesive

Adhesive Sticker or Epoxy Mount

Type Permanent Acrylic
Minimum Application Temperature 50°F
Adhesion to Metal* at 24 hour dwell Good

 

*Adhesion information for smooth surfaces

 

Epoxy Mount is used for high durability required applications such as rough or high vibration locations.

 

Tag is supplied with no adhesive or epoxy. Contact WFCo for suggested mounting epoxy.


Shelf Life

Stored 77°F in its original packaging

2 years

Design

Metal Mount Tool Tracking RFID Tag Design

Similar Products


Find it Now!

WeatherTUFF Outdoor Labels
Buy Now on Shop.Fricknet
Browse by categories: