blogger visitor

Long Range Directional RFID Tag

RFID Product, Long Range RFID, RFID Labels

  • Currently 0/5 Stars.
Long Range Directional RFID Tag picture
Long Range Directional RFID Tag small Long Range Directional RFID Tag small

SmartMark™ Long Range Directional RFID Tag

 

The SmartMark™ WF-SM-YUSAMPLE RFID tag provides a combination of long read distance and outdoor durability in a cost competitive label. The patent-pending RFID tag configuration is perfect for tagging overhead, utility pole-mounted, or in-ceiling assets. It allows effective tracking of assets that are normally difficult to read up to 65 feet above the ground.

 

RFID tag can easily be peeled and stuck to plastic or wood surfaces. This RFID tag will provide long life in outdoor exposure or severe industrial environments, because it is made of UV resistant and outdoor tested materials. Custom mounting configurations are available for RFID tracking all-metal assets.

 

Label can be customized with logos, messages, or serial information.

 

  • Read distance up to 65 feet
  • Ideal for tracking overhead assets
  • Outdoor durable construction
  • Directional radiation pattern

Download Product PDF

Bookmark and Share

Applications

High Value Asset Labeling, Asset Marking & Tracking, Overhead & Above Ground Marking

Material
Description

Polyester

Dimensions (LxW): 6.4” x 3.5” (16.2 cm x 8.9 cm)
Thickness: 6 to 14 mils
Expected Outdoor Durability: Excellent
Water Resistance: Excellent
Abrasion Resistance: Excellant
Solvent Resistance Good

 

 

 

Test* Temperatures and Duration
Results
Maximum Temperature Long-term at 10 hr: 302°F (150°C) No effect on tag. Tag remained the same in appearance and RFID performance/function. There was no sign of peeling, tearing or destruction. The tag read normal after the tests. *Test is not limiting.  

Standard at 5 min: 340°F (171°C)

Short-term at 90 sec: 360°F (180°C)

Minimum Temperature

 

-40°F (-40°C)
Temperature Cycling The tag was cycled to 360°F at equilibrium for five times. Between each cycle, it was air cooled to room temperature and read with an RFID reader.

Pre-programming options available

 

RFID Performance

RFID Protocol: UHF Class 1 Generation 2
Chip Manufacturer: Impinj Monza 5
Tag Type: Passive Read/Write
Frequency Range: 840-960
Memory:

128 bits

 

 

 

Tested Polarization:

Tag performance was experimentally measured in an anechoic chamber and a known set of experimental variables. The antenna used for measurements was linearly polarized and of monostatic configuration. The direction of tested polarization is along the labels edge.

 

 

Optimal Read Range* on Different Material Surfaces:

 

 *Tag performance was measured free of material influence, on a dry wood slab, and standard thermoplastic. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.

 

Edge Orientation vs Optimal Read Range (ft)* Forward at 915 MHz

Windshield Tag Orientation Graph

 

 *Tag performance was measured free of material influence, on a dry wood slab, and standard thermoplastic. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.

 

 

 

Adhesive

Permanent Acrylic

Min App Temp:

50º F

Service Temp:

-40º F to 160º F (outdoors)

Adhesion to LSE plastics: Very Good
Adhesion to HSE plastics: Excellent

Shelf Life

Stored 70°F(22°C) and 50% relative humidity

2 years

Design

Long Range Directional RFID Tag Design

Similar Products


Tamper Evident RFID Label
Tamper Evident RFID Label
  • Currently 0/5 Stars.


WFS-SM-SA SnapAround RFID Tag
RFID SnapAround Cable Markers
  • Currently 4.66667/5 Stars.


Silicone RFID Laundry Tag
Silicone RFID Laundry Tag
  • Currently 4/5 Stars.


Find it Now!

Click to chat online

Call us toll-free

(866) 669-7590

Outside the U.S.

(847) 918-3700

Sign up for special offers!
I Agree to receive e-Mail from William Frick & Co.

Privacy
Browse by categories: